Instructions for use and battery maintenance of drone signal jammer

 When using drone signal jammer, first check whether the battery is sufficient and aim at the direction of the drone; secondly, turn on the signal frequency switches of each drone in forced landing mode and the drone will land slowly; keep the GPS switch unopened, and the drone will return in return mode, and it can return according to the original flight route; press the control switch device in working mode to make the drone make forced landing or return according to the selected function switch, release the control switch device to stop working, and the drone will not be affected; finally, please check the battery after use, and charge it in time if the battery is insufficient;

1

1. New batteries should be fully charged

When using a new drone signal jammer for the first time, make sure that the battery is fully charged before using it. It is best to use the battery for the first three or four times, and use up the battery each time. Each time you use the battery, it is best to use up almost all the battery power before charging.

2. Charge it once and fully.

During the charging process, it is best not to turn off the power of the signal jammer before it is fully charged, and then plug it in for charging after a period of time. After all, multiple charging will also cause great damage to the battery.

3. Make sure that the battery is used at least once a month and the battery is exhausted.

If you use the power adapter most of the time, you can remove the signal jammer battery, but it is best to install the battery every month to use up the power in the battery and fully charge the battery.

评论

此博客中的热门博文

5ghz deauther jammer bands for different carriers

GPS jammer instruction manual

How many mobile phone signal jammers can be connected to the mobile phone shielding system?