Relationship between frequency jammer and WiFi

 If you want to make a frequency jammer, you can determine how many frequency bands to make based on the WiFi frequency distribution at the site. If the site requires the interference range of the frequency jammer to be relatively small, with a radius of about 10-20 meters, then you can use a low-power frequency jammer module, which can basically meet the requirements of on-site shielding. Of course, it also depends on the distance between the WiFi signal source and the frequency jammer. The closer the mobile phone or WiFi receiving device is to the shield, the better the interference effect will be. The closer the distance between the mobile phone or WiFi receiving device and the WiFi signal source, the worse the shielding effect will be than the same distance at the far end.

16 Antennas portable All in one signal jammer

If the site requires the interference range of the frequency jammer to be relatively large, with a radius of about 20-100 meters, then you can use a medium-power frequency jammer module, which can basically meet the on-site shielding requirements. As for the interference distance, it is the same as the above-mentioned low-power principle.

If the interference radius of the on-site frequency jammer exceeds 100 meters, you can use a high-power frequency jammer module. The shielding distance is the same as the above-mentioned low-power shielding principle.

Use medium power or high power. One is conventional AC power supply, that is, the power supply of the frequency jammer should be connected to 220 AC power, and then the equipment is powered by the switching power supply. This method is more suitable for fixed places or places that need to be fixedly installed. Another method is to use battery power supply, which can be designed as an external battery or a built-in battery. The external battery is mainly used in medium-power mobile phone shielding, and the built-in battery is mainly used in high-power frequency jammers.

评论

发表评论

此博客中的热门博文

5ghz deauther jammer bands for different carriers

图片
 With the upgrade of the domestic communication network, the new era of 5G network is officially commercialized. So in the new 5ghz multi-mobile communication network era, how to choose to replace the latest 5g jammer in some exam rooms, meeting places, prisons and other occasions where the use of mobile phones is prohibited? First of all, let's take a look at the 5G frequency band division of the four major domestic operators, which will help us better understand the relevant performance of 5G mobile phone signal jammers and shield the network, so as to correctly choose the  cell phone signal jammer . The operation licenses for the 5G frequency allocation scheme of the four major domestic operators have been issued, and the Ministry of Industry and Information Technology has issued the national 5G medium and low frequency band trial licenses to the four major basic telecom operators, which also means that the 5GHz deauther network has officially entered the commercial scope. ...
阅读全文

GPS jammer instruction manual

图片
 There are three categories of GPS jammers: (1).  GPS jammer , which blocks satellite signals (which, in turn, creates noise in communication satellite frequencies). The signal is always transmitted to equipment located on the road (or above) at two key frequencies: the GPS frequency (civilian L1 frequency band used to locate trackers) is 1575.42MHz. Frequency GLONASS (civilian L1 frequency band, used to locate trackers): 1602MHz. Because the frequencies are so close, they are blocked by broadband network noise generators, requiring only a wireless antenna. (2) GSM jammer, which will have an impact on communication operators. Operators work under different rates, which actually lies in the mode (3G, 4G) and standard (GSM, DAMPS, CDMA). This way, many wireless antennas can be combined onto a single blocking device, thus shutting down all the wireless antennas so they can be separated. (3) Universal jammer. It applies to all frequency bands, such as communication operators and s...
阅读全文

How many mobile phone signal jammers can be connected to the mobile phone shielding system?

图片
 The mobile phone shielding system uses the TCP/IP protocol. The ID of the network version of the mobile phone signal jammer is its own IP address. Up to 254 IPs can be set in each network segment. Through network settings, different network segments can also be connected to each other. . Therefore, in theory, an unlimited number of IP addresses can be set. In the mobile phone shielding system, as long as the network between the network version of the mobile phone signal jammer and the controlling computer or server is connected, unified control through the mobile phone shielding system can be realized. Manage all the functions of the network version of the  cell phone signal jammer  under its jurisdiction. In a unit, there cannot be an unlimited number of network devices, so it is better to worry about the number of mobile phone signal jammers controlled by the mobile phone shielding system. Will the operation of the mobile phone shielding system affect the normal operat...
阅读全文